Operation Manual

Scan

Press the RED button on the TP list.

Pop up window will be displayed on the screen.

• Frequency: Input a proper Frequency using the

NUMERIC buttons.

• Symbol Rate: Input a proper Symbol Rate using

the NUMERIC buttons.

• Polarity: Use the LEFT/RIGHT buttons to select

the Polarisation of the transponder.(Horizontal,

Vertical)

• FEC: Use the LEFT/RIGHT buttons to select the

FEC of the transponder.

• You can select the value of Auto, 1/2, 2/3, 3/4, 5/6,

and 7/8.

• Network: You can select Yes or No. When you

select “Yes”, you can find more transponders using

the home network.

• Video PID/Audio PID/PCR PID: You can set PID

to search for services. Use the LEFT/RIGHT

buttons or the NUMERIC buttons to input the

value. Press the OK button to start Scanning.

4 C/KU Switch: You can select C/KU band by

selection of switch type.(None, DiSEqC Switch)

5 Position (DiSeqC 1.2) : After selecting a satellite,

please select position number. To change value,

press the OK button. The position list will be

displayed.

6 LNB Freq.: Select the proper LNB frequency

referring to your LNB using the OK and the

UP/DOWN buttons.

N550 SAT ”„» 2/7/06 4:18 PM ˘ ` 34 mac-4 HP LaserJet 5100 Series T