Operation Manual

27
12
Recall List
Recall List is to show the previous channels (up to 10
channels).
a If you press the RECALL on the screen, the
Recall List Pop-up window will appear.
b Press the UP/DOWN button to select the channel
and then press the OK button. The changed
channel will be shown with the channel banner.
13 DISPLAY Setting
This mode changes settings such as the RF
Channel, RF Mode and TV Type.
If you press the DISPLAY button, the DISPLAY
screen of the System Setting menu will appear.
Change the settings on the screen. Refer to [4. Main
Menu Guide - 4.5 System Setting - 4. Display] for
more details on setting changes.
14 Satellite Change
This mode can change the satellite when you search
channels from several satellites.
If you press the SAT button while you are watching
TV, the satellite change pop-up window will appear. If
you press the UP/DOWN button, you can change the
selected satellite.
15 Sleep Timer
The unit will be turned off automatically after a
specified time.
If you press the SLEEP button while you are
watching TV, the Sleep Time pop-up window will
appear. Each time you press the SLEEP button, the
time will be changed in these intervals: 10, 20, 30,
40, 50, 60, 70, 80 and 90 minutes. After you have
changed and saved the time, the Sleep Time pop-up
window will disappear.
• Press the EXIT button
to exit from the Recall
List Pop-up window.
N550 SAT ”„» 2/7/06 4:18 PM ˘ ` 27 mac-4 HP LaserJet 5100 Series T