Operation Manual

To change the audio output

a Press the A.L/R button on the remote control unit

to change the output.

b Then on-screen menu is displayed on the top

right side of the screen.

c Press the A.L/R button repeatedly to change the

sound mode. (Mono, Left, Right, Stereo)

PIP

The PIP (Picture-in-Picture) function allows you to

watch two screens at the same time. With the PIP

function, you can move the PIP screen or freely

adjust the screen size.

a If you press the PIP button while the channel is

showing on the screen, the PIP will be shown at

the top left of the screen.

b If you press the PIP CH button, the PIP Simple

Channel List will appear on the screen.

c Press the UP/DOWN button on the PIP Simple

Channel List screen to select a channel, and

press the OK button.

• Press the PIP button to make the PIP screen disappear.

• Press the FILE/MODE button and press the UP/DOWN or

the LEFT/RIGHT button to change the location of the PIP

screen.

• Press the FILE/MODE button once again and press the

the UP/DOWN button or the LEFT/RIGHT button to

change the size of the PIP screen.

• If you press the FILE/MODE button once again, you can

see the screen as a multi-media window type. The main

screen will be displayed on the left, and the PIP screen on

the right side of the screen, as a multi-media window type.

• Press the SWAP/TUNER button to swap the main screen

for the PIP screen, while the PIP screen is showing.

N550 SAT ”„» 2/7/06 4:18 PM ˘ ` 26 mac-4 HP LaserJet 5100 Series T