Operation Manual

19
TV with Motorized System (DiSEqC 1.2)
a Connect one end of RCA/Cinch cable to the RCA/Cinch jack on the back of the
receiver and the other end to a RCA/Cinch jack on your TV. If your TV doesn’t have
a RCA/Cinch jack, connect one end of RF cable to the TV OUT on the back of the
receiver and the other end to a RF input jack on your TV.
b Connect one end of your coaxial cable to the LNB IN connector on the receiver and
the other end to the REC or Receiver connector on the DiSEqC 1.2 motor.
c Connect the coaxial cable from the LNB to the LNB connector on the DiSEqC 1.2
motor.
N550 SAT ”„» 2/7/06 4:18 PM ˘ ` 19 mac-4 HP LaserJet 5100 Series T