Operation Manual

17
5. Loop Through
If you have another analogue or digital receiver and you wish to use the same LNB
then you can connect it via the loop through. Connect one end of the coaxial cable to
the Loop Through on the receiver and connect the other end to the LNB IN on your
second receiver.
6. Analog PVR Connecting (Option)
Used to record received signals
Connect the Video cable of the Analog PVR to the Analog PVR Video.
Connect the Audio cable of the Analog PVR to the Analog PVR Video.
7. DVR Connecting (Option)
The camera has to be connected to the sensor to watch via the DVR.
Connect the Video cable of the camera to the DVR Video jack.
Connect the Audio cable of the camera to the DVR Audio jack.
Connect the sensor to the sensor jack.
N550 SAT ”„» 2/7/06 4:18 PM ˘ ` 17 mac-4 HP LaserJet 5100 Series T