Operation Manual

15
2.3 Rear Panel
No. Button Functions
1 POWER SUPPLY AC 90-250V, 50/60Hz, 45W(maximum)
2 POWER SWITCH To provide power to the main unit
3 LNB To connect to a satellite antenna and cable jacks.
4 LOOP THROUGH To connect an RF signal from the receiver either to the RF input jack
on your television or to the receiver.
5 RS-232 To connect to a personal computer for software upgrade.
6 ANT IN To connect a general aerial antenna and cable jacks to an RF input
jackon the rear of the receiver.
7 TV OUT To connect a TV via a coaxial cable.
8 USB USB port
9 S/PDIF (Coaxial) Output for connection to a digital amplifier (Coaxial).
10 VIDEO Video connection port to the TV or other equipment.
11 AUDIO Audio connection port to the TV or other equipment.
12 SCART FOR VCR To connect this port to the VCR via a SCART cable.
13 SCART FOR TV To connect this port to the TV via a SCART cable.
14 AUDIO (Option) Audio that connects to the Analog PVR
15 VIDEO (Option) Video that connects to the Analog PVR
16 S-VIDEO Video connection port to a TV or other equipment via SUPER
VIDEO.
N550 SAT ”„» 2/7/06 4:18 PM ˘ ` 15 mac-4 HP LaserJet 5100 Series T