User Manual

Step 3: Attach TV to Wall Plate
Step 4: Release the TV
With the TV Brackets fi rmly secured to the TV, use two people to lift the TV into position and hook the TV brackets
onto the Wall Plate, as shown in Diagram D. The two spring loaded Quick-Lock Brackets will snap into place as you
lower the bottom of the TV onto the plate.
For minor level adjustment, you can adjust the two top Leveling Screws using a Phillips screwdriver to ensure the TV
hangs level, as shown in Diagram E. If you need to release pressure on the screws, pull down slightly on the Quick
Release cords as shown in Diagram E.
Because the TV sits so close to the wall, the Quick-Lock TV Brackets are equipped with Quick Release Cords. You may need
to loosen the top Leveling Screws slightly to release tension. Pull down on the cords to release both Quick-Locks (as shown
in Diagram E), and pull the bottom of the TV away from the wall. Then, using two people, lift the TV up and away from the
Wall Plate.
CAUTION
Read this section carefully prior to install.
WARNING
Use two people to lift and position the TV onto the Wall Plate.
Diagram D
Diagram E
Hook
Level
Pull
Cord to
Release
6