English User Manual F6080 TV Mount FIXED FLAT PANEL TV MOUNT 200 lbs (91 kg) 100 x 100 – 1100 x 600 VESA COMPLIANT Supporting your digital lifestyle™
Table of Contents Table of Contents / Introduction . . . . . . . . . . . . . 2 Supplied Parts & Hardware . . . . . . . . . . . . . . . . . 3 Setup - Step 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Setup - Step 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Setup - Steps 3 to 4 . . . . . . . . . . . . . . . . . . . . . . . . 6 Other Kanto Products . . . . . . . . . . . . . . . . . . . . . . 7 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Supplied Parts and Hardware Wall Plate x4 x4 A: M5 x 15mm Bolt B: M5 x 25mm Bolt x4 x4 E: M8 x 20mm Bolt I: Lag Bolt Washer x4 C: M6 x 15mm Bolt D: M6 x 25mm Bolt G: M8 x 50mm Bolt x4 J: 5mm x6 K: 10mm L: Lag Bolt x2 N: Quick-Lock TV Bracket M: Concrete Anchor Required Tools Phillips Screwdriver H: Washer x4 x6 Socket Set x4 x4 F: M8 x 35mm Bolt x6 x4 Hammer (for Concrete installs) Pencil Supporting your digital lifestyle™ Stud Finder Level Drill 7/16” Masonry Bit 3/16”
Step 1: Attach TV Brackets There are a wide variety of TVs available offering an assortment of bolt sizes. We provide a selection of mounting bolts to fit most TVs. If you have any concerns about this mounting hardware or installation call us direct at 1-888-848-2643 or email at support@kantoliving.com. Step 1.1 Select the correct size of bolt Kanto provides 3 bolt diameters (Metric sizes M5, M6 and M8) in various lengths. Part items: A, B, C, D, E, F or G.
Step 2: Mount Wall Plate Wood Stud Wall Brick or Concrete Wall The Wall Plate can be mounted to three wood studs with 16” centers, or to two wood studs with 24” centers. Use a stud sensor to locate the studs, clearly marking the outer edges of the studs. Use a long level to ensure the holes are level at the desired height. Using the Wall Plate as a template, mark six holes (four toward the outer edge of the Wall Plate and two near the center) at your desired height (see Diagram C).
Step 3: Attach TV to Wall Plate CAUTION Read this section carefully prior to install. With the TV Brackets firmly secured to the TV, use two people to lift the TV into position and hook the TV brackets onto the Wall Plate, as shown in Diagram D. The two spring loaded Quick-Lock Brackets will snap into place as you lower the bottom of the TV onto the plate.
Kanto Speakers • Check out our full line of bookshelf and desktop speaker systems • Available in a stunning array of colors • Visit kantospeakers.com for more! + SP26 + + par • Full line of Audio and Video Cables • White or Black Cables available • HDMI, Optical, Mini-jack, RCA, USB • Switchers, Hubs, and Adapters • Visit kantoliving.com To learn more about all our products, visit www.kantoliving.
Warranty Limited Warranty to Original Purchaser Kanto Distribution Inc.
