Datasheet

Kanthal Appliance Alloys Handbook. 43
8
8. Delivery Forms
Spool Tare Spool measurements, mm Wire dia. Capacity
No. g D d l d1 L mm approx. kg
B 1 100 75 40 100 16 120 0.10-0.19 1
B 2 115 90 40 100 16 120 0.20-0.24 2
B 4 180 120 50 100 16 120 0.25-1.00 4
K 200 600 200 125 160 36 200 0.16-1.20 10
K 250 1050 250 160 160 36 200 0.30-1.63 20
K 355 1850 355 224 160 36 200 0.50-1.63 40
Resistance Heating alloys (KANTHAL, ALKROTHAL,
NIKROTHAL, NIFETHAL 70 and 52)
Types of Wire Spools
Wire
Wire of ≤1.63 mm is delivered on spools,
such as shown in the figure. Only one
length of wire is wound on each spool. Wire
sizes between 0.40 and 1.63 mm can be
In order to avoid transport damage all
goods are carefully packed in card board
boxes or wooden cases, with suitable inter-
nal protection.
∂
L
Ød
1
ØD Ød 60°
L
5
l
Types of Wire Pails (Drum Pack)
Pail Tare Pail measurements, mm Wire dia. Capacity
No. g D, outer D, inner height Material mm approx. kg
P50 2600 508 330 150 Plastic 0.40-1.63 33
P100 3500 508 330 250 Plastic 0.40-1.63 50
P200 8500 500 300 520 Cardboard 0.80-1.63 160-240
P350 10000 500 300 820 Cardboard 0.80-1.63 250-400
supplied in round Pail Packs (drums) such as
shown in the table below. Wire sizes
>1.65 mm is normally supplied in coils with
an inner diameter of approx. 500-600 mm.
H
D, inner
D, outer
615