Software Manual User guide

4
3. Functional Specification
ITEM CONTENTS
Model No. 1550, 1560, 1500
Module V, VT, VTH, SP
Numbers of
ANEMOMASTER
5 units (maximum) can be connected.
Channel Nos to measure MAX. 320CH (in case of V module) CH Nos depend on module.
Probe positioning Optional position in 3 dimension of rectangular coordinates.
Measurement mode Channel mode
Data mode Average value mode, Instant mode
Interval of measurement
0.1～6553.5seconds, you can set up by 0.1 second unit
Repetition time 65535 times MAX.
Port
ＣＯＭ１、ＣＯＭ２、ＣＯＭ３、ＣＯＭ４
Baud rate 300, 600, 1200, 2400, 4800, 9600, 19200 bps
Delimiter
ＣＲＬＦ, CR
Length of data
８ bit
Parity None
RS232C
Stop bit
１ bit
Statistical calculating
function
・calculate maximum, minimum, average value and standard deviation from data
of each probe
Parameter
display
Display of module set up, probe set up, RS232C parameter, measurement
parameter
Time serial
graph
・ Data for one probe is displayed in one window.
・MAX.320 of time series graph windows can be opened simultaneously.
・Select probe by table.
・Vertical :V,T,H,P (by probe) , scale can be set up optionally.
・Horizontal : times
・Switch scroll and pages
・Display of statistic data
Display
Data table
・Display of all channel data value of one sampling simultaneously.
・Display of module, channel, probe condition, probe nos, comment, probe position,
data ( possible to select yes or no to display unit indication ).
※ Possible to select indication items other than data.
Time series
graph
・ Print out graph in active “time series graph window”.
Print
Data table
・ Print out work sheet of data table.
User back up function
・Version information
・Tool hint
・Status indication
・Indication of file information and comment input