TM The Force Coding Kit motion sensor How to make
You don’t know the power of the dark side
I want to learn the ways of the Force
Take out the pieces PCB + Sensors PCB SENSORS Light ring LIGHT RING PARTS POWER Power power 1 Batteries batteries
CONSTRUCT Top case top case kano.
Let’s begin.
battery Turn over the PCB and slot in both batteries Make sure they are the right way round 4
Time to add some control control Push the power button onto the PCB 5
FIT Make sure it is snug Size matters not 6
Now place the PCB into the bottom case CASE Line up the button with the groove in the base 7
BASE Gently push the PCB into the base RROOAARRGGHH! 8
Take the top case light ring and push the light ring into it 9
reinforce Make sure it’s pushed in all the way I feel it again.
Take the top case with the light ring ALMOST THERE Push it onto the bottom case 11
CONNECT Until it clicks Follow me 12
Choose an icon Rebel Galactic Empire REBEL galactic EMPIRE ICONS Are you light side or dark side? 13
ATTACH Place it on top Push the pegs into the holes 14
To turn it on...
Now, reach out... put your hand over the sensors.
The PCB also turns your movements into 1s and 0s – binary code I am fluent in over six million forms of communication binary A simple language your computer can understand 17
code It beams those 1s and 0s to your computer X: 10 Y: 3 Z: 52 letting you make things move on a screen 18
YAHOOOOO! Your kit is complete, kid 19
DOWNLOAD Now, simply download the Star Wars™ Coding Kit by Kano app onto your device to start playing with the Star Wars™ The Force™ Coding Kit motion sensor Download it at kano.
Go from learner to master as you create endless Star Wars™ adventures 21
The more you train, the more powerful you’ll become 22
9e3 ebe 23
a galaxy of tips A g al ax y o f t ip s 24
Take a closer look LEDs leds SENSORS SENSORS small It’s made of sensors, LEDs, microprocessors, resistors and tracers 25
Each sensor has two lenses.
When your hand breaks the beam, it gets reflected back to the bottom lens reflected so the sensor can see where your hand is 27
movement All four sensors work together to tell if your hand is going...
The power button should always point towards you POWER I’ll take good care of her.
sleep To save battery power, put the kit into sleep mode L HO OR DF 3 C SE ON DS Press and hold the button for three seconds 30
The Bluetooth light on the side will tell you if your kit is connected connect 31 FLASHING SOLID BLUE SEARCHING FOR YOUR DEVICE CONNECTED TO YOUR DEVICE
low power The lights on top also tell you different things LOW BATTERY CHANGE BATTERIES LOW battery change batteries 32
To change the batteries, press and hold the side open Pull the top case off 33
case Take out the PCB Why don’t we just use the Force? and change the batteries 34
Aurebesh is a language in the Star Wars™ galaxy what does 35
this say? Try to translate some of the Aurebesh words you see throughout this book 36
Only now, at the end, do you understand 37
You must unlearn what you have learned 38
Something not working? Get help fast at help.kano.
HELP 39 IC Caution: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. case FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference.
© & TM LUCASFILM LTD COPYRIGHT © KANO COMPUTING LTD 2019 ALL RIGHTS RESERVED 19G9045-01A
