User Manual

Racing Electronics SWITCH Manual Version 2.0 11/05/2017
operation. After that, the Radio receiver is turned OFF. In that mode, you still have 5 hours of
operation but from the Audio Input Port only.
The SWITCH comes with 2x AAA batteries, a lanyard & instruction manual.
SPECIFICATIONS
Features
Audio In: Yes, cabled
Always muted when one RF Channel is active.
RF Channels: 2, from built in Radio receiver
Preset but programmable by user
Automatic scan: Between preset channels 1 and 2 only. (Not available on SWITCH RACER)
Functionality: Hold on Channel Ch1 or Ch2,
Scan, Scan Priority Ch1, SCAN Priority Ch2 (Not available on SWITCH RACER)
Operation: Normal (Audio In, Ch1 or Ch2)
Battery Low (Audio In, CH1 or Ch2)
Bypass mode (Audio In only, RF receiver is OFF when battery too low)
Battery Low Indicator: Yes
Built In memory: Yes, (last preset saved, even when changing batteries)
Compliance: Compliant with official Motor Racing sanctioning body.
RF Radio Receiver
Frequency Range: 450 MHz to 470 MHz
Channels Bandwidth: 12.5 KHz, for a total of 1600 channels
Sub Channel Technology: Analog CTCSS or PL (Motorola
TM
)
Digital CDCSS or DPL (Motorola
TM
)
Mechanical:
Dimensions: 3.00"W x 1.75"H x .80"D
Weight: 0,2 g (without batteries)
Electrical:
Audio Input: 1/8” (3.5mm) Stereo socket, accepts mono and Stereo jack
Audio Output: 1/8” (3.5mm) for Stereo earbuds/Headsets, 8 to 32 Ohms
Audio Output Level: User adjustable for internal RF receiver.
Audio from Audio In adjusted from connected device only.
Power:
Batteries: 2x AAA (included)
Battery life: 7 Hours (continuous) + 5 Hours in bypass mode
Accessories:
Included: Lanyard with safety clip and quick detach
User manual
Optionnal accessories: Belt-clip
Earbuds