3D Virtual Reality Camera
Contents EN Name of Parts 1 Specification Parameters 3 Package Contents 4 Using the Camera 5 Operate with Remote 7
Name of Parts Introduction to camera parts Hot/Cold-Shoe Mount Battery Cover Lens Micro SD Card Slot Power Indicator Working Mode Indicators Power Button Time-lapse Photo Capture Button Video Record Button Microphone 12V External Power Supply Terminal Tripod Mount: 3/8“UNC Tripod Mount： Anti-Rotation Pin Zoom Audio Tripod Mount: 1/4“UNC Port 1 Micro USB Port
Introduction to camera remote control parts Photograph Indicator Power Indicator Video Indicator Power Button Time-lapse Photo Capture Button Video Record Button Buzzer Battery Cover 2
Specification Parameters Model Obsidian GO Video Format MOV Weight (Camera+Battery) 1015 g Recording Media Micro SD Card (Maximum 128G) H.264 Video Coding Format Battery 7.4V, Adapter 12V Working Voltage 10.5W Power 30 fps Frame Rate Working Temperature -10 ~ 40 °C Working Humidity 10~90% RH Storage Temperature -40 ~ 80 °C Storage Humidity 5~90% RH Frequency Range 2404MHz-2476MHz Max Output Power 3.5dBm for Remote Control 0.2dBm for Camera Software Version MP_VER.01.00.
Package Contents Obsidian GO Camera Carrying Case Shoulder Strap Manual Lens Cleaning Cloths Sync Control Cable Remote Control Remote Control Batteries i Batteries LP-E6 Lens Cleaning Pen ( Optional ) 4 for Zoom H2n Handy Recorder(spatial sound) Adapter Card Reader USB 3.
Using the Camera Power the Camera using one of the following ways 1 12V external power supply 2 2 X Canon LP-E6 or compatible batteries 5
Insert Micro SD cards Insert all six Micro SD cards into the slots. U3 (USH-I) cards are required. Power on / off Power on: Press the [Power Button], if the camera turns on normally, the power indicator lamp emits red, and the six [Working Mode Indicators] emit blue. Power off: Press and hold [Power Button] until all [Working Mode Indicators] turn off, then the camera is powered off. Photograph & Video-record Photograph: Press the [Time-lapse Photo Capture Button] to capture a photo.
Operate with Remote Control Install the battery & connect with camera Install the battery：Open the battery door and insert 2 AAA batteries. batteries Connect with camera：Switch on camera first, then press any button on the remote control to start connecting, during this process Power Indicator will flash slowly, and then go off after the connection is done.
Indicator lamp description Slow flash Quick flash Camera is on but disconnected with remote control Low power/ camera is on abnormal status Taking a photograph An error has occurred during taking a photograph Recording a video An error has occurred during recording a video Camera is in dormancy Reminder: 1. In a normal working status, once a button is pressed on remote control, [Power Indicator] and [Buzzer] will both respond. 2.
Safe Handling Precautions 1. Avoid condensation and freeze -- When moving the camera from one extreme temperature to another, keep your camera in sealed plastic bags to prevent condensation. Allow time for equipment to adjust to temperature change before removing from the plastic bag. 2. Avoid snow -- Be careful that snowflakes can easily scratch the lens. To prevent camera circuits from being damaged by melting snow, please turn off the camera and pull out the battery immediately. 3.
FCC Special Statement FCC Regulatory Information Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
w w w . k a n d a o v r. c o m Kandao is a high tech company committed to virtual reality with a strong mixed of mission and passion to build the best VR camera for the mass. The co-founders and core team members of Kandao graduated from top universities and have either/both technical and/or commercial backgrounds in leading technology organization such as Tencent, Huawei, Philips, Sharp and other well-known enterprises.
