Datasheet

Kanda AVRUSB - AVRUSB Programmer http://www.kanda.com/products/kanda/AVRUSB.html
1 von 3 19.03.2008 09:18
Home Programmers/Burners In System Programming (ISP) AVR ISP Programmers
Selected Category: AVR ISP Programmers (For all products in category Click Here
)
AVRUSB Programmer Order Code: AVRUSB Price: €134.1
AVR USB Programmer with JTAG
AVR In System Programmer (AVR ISP) for the USB port on
the PC. Packed with extra features for ATtiny, AT90S and
ATmega AVR microcontrollers. This AVR programmer is
powered from the USB bus, has low voltage target support, is
very fast and multiple programmers can run from a single PC.
NEW Features
Software includes JTAG interface and adapter is supplied
for JTAG programming
Supports new devices including ATtiny24
DLL and Command line versions available free
see DLL page
Main Features
AVR Programmer powered by USB bus
Conforms to USB power requirements, including sleep
Supports USB v1.1 protocol and USB v2.0 compatible
Direct USB drivers not Virtual Serial Port
Supports Win 98SE/2000/XP/ME/Vista
Win 95 and early Win98 should work with
Microsoft USB update
NT4 is NOT supported, as Microsoft have not
updated kernal support and no driver support is
available
32-bit Vista only
Programs AVR devices from 1.8V to 5V
Multiple programmers from one PC
Uses Kanda standard AVRISP 10-way target interface
JTAG programming option and adapter
Automatic program start on insertion
Software Features
Simple install and detection of each programmer
Multiple programmers can be operated from a single PC
screen or multiple screens
Select ISP or JTAG from drop down list
Full Fuse and Lockbit support on user friendly screen,
with improved default values to improve device
detection
Colour coded Flash and EEPROM buffers can be edited in
Hex and ASCII
User defined serial numbering in Flash or EEPROM
Comprehensive Check Sum support CR16/32, XOR
16/32
Flexible Auto-program options
Pop-up Reset on Error feature prevents errors being
ignored - can be disabled
Plug and Program mode - programmer starts
automatically when new target is detected, if this mode