Datasheet

• Plugin Programmer and ideally remove other USB devices
• Go to Control Panel > System > Hardware screen
• Click on Device Manager button
• Open USB section and select “USB Serial Converter”
• Right click on it, and select Update Driver
• Driver location is (default install path)
C:\Program Files\embres\AVRBKF-U\driver\driver
Error Message: “Programmer is not responding – check
connections and battery power”
1) Check dongle is attached to USB port
2) Check that programmer is connected to PC as shown on Page 1
3) Check battery or power supply to the programmer
4) Make sure you have a Handheld Programmer dongle, not a
standard AVRISP-U/STK200 dongle. The unit will say “Dongle” on
it.
Programming Errors – RED Flashes on LED when programming
1) Ensure your target circuit is wired correctly as shown in
connection diagram on Page 4
2) Check power options are correct – see Power Options on Page 3
3) Slow down programmer speed in software – especially if you have
capacitors on programming lines or other unusual circuitry.
4) Check battery voltage
FURTHER INFORMATION
Please contact [e-mail] for technical support or go to our website
support pages for latest software.
See www.kanda.com/support
Contact details
Website: www.kanda.com
email: [e-mail]
Phone/Fax: [phone]