User's Manual
1-2. Open the App, click the "+" button in the upper right corner of the device to add a device, enter the add device interface, select "Kamoer-
X1PRO" in the list of supported devices and click to enter;
3.Make sure that the mobile phone is connected to the WiFi that needs the network, and that the WiFi can be connected to the external network,
(the device does not support 5G Wi-Fi, and 5G Wi-Fi hotspots cannot be used);
4.Enter the Wi-Fi password, be careful not to enter the wrong password, and click "Next" to enter the device networking operation;
5.Press and hold the "Reset" button on the rear panel for more than 4 seconds and then release it. Wait for 3 seconds. At this time, the blue status
indicator flashes quickly and the device enters the network configuration state. In the device network configuration state, click on the App" The light
is flashing quickly" button to start network configuration;
6.Wait for the network configuration connection to be successful, after the connection is successful, the App will pop up a successful connection
interface;