User's Manual

3.After the binding is successful, the binding success prompt pops up, clicks to start, and returns to the device list;
4.3 Overview of the titration pump control interface
Open the app, click on the titration pump in the device list to enter the titration pump operating interface, titration pump operator interface contains three
modules:
a.Plan In this module, two functions are implemented, The first is to set the titration plan, titration pump according to the user set the scheduled
quantitative titration, to solve the labor operation of cumbersome and inaccuracy. The second is to view the total amount of the solution bottle, the
remaining amount, let the user understand the status of the solution bottle, when the solution bottle reagent is insufficient, there will be a yellow
color prompt, tell the user to add the solution bottle in a timely manner reagent.
b.Manual Manual control adds a certain amount of solution, convenient for the user to operate at any time.
c.Set upContains 3 features
(1)Name Setting:Set the name of the titration pump and the names of the four pump heads so that the user can distinguish between different
equipment and pump heads;
(2)Firmware Upgrade:Upgrade the titration pump firmware;
(3)Time Setting:Set the real-time clock time of the device so that the device can execute the plan normally;
(4)Flow Calibration Calibrate the flow rate of the titration pump to make the titration pump run more accurately;
4.4 Plan Titration - Plan Settings Details Page
1.Auto mode channel details