User's Manual

a.Device serial number：：
b.Current version of firmware：： Show the current version of the firmware, if the firmware has an update, there are tips below;
c.Name：： Here you can modify the device name and the name of each pump head to identify the purpose of the device and pump head;
d.Serial number：： Click to enter the display device serial number;
e.Update：： Firmware update, if there is a new firmware release, there will be a prompt;
f.Time settings：： Set the real-time clock time of the firmware to ensure the correct execution of the pump titration plan;
g.Flow rate calibration：： The flow rate of each pump head is calibrated here, and the purpose of the flow calibration is to improve the accuracy of
the added elements;
h.Restore factory settings：：Click to restore the firmware parameters to the factory settings;
i.Remove the device：：Unbind the app from the device.
4.8 Time settings
When the time of the device and the local time do not meet, it is necessary to synchronize the real-time clock time of the device through the app to
ensure the normal execution of the device titration plan;
a.Device time：： The current real-time clock time of the device;
b.App Time：： The current time of the phone;
c.Time synchronization：： Click after the departure device time synchronization, time synchronization, the device running time and mobile phone
time will be the same; a-1, b-1 is the real-time clock time and mobile phone time of the device after the time is synchronized;
4.9 Flow Calibration
The purpose of calibration is to improve the accuracy of the added elements; Click "Flow Rate Calibration" in the setup interface to enter the calibration
pump head selection interface, select the pump head that needs to be calibrated, and enter the flow calibration interface. Calibration needs to use the
barrel, the pump factory has been equipped with a 10ML measuring tube, taking into account the pump tube titration concentration is different, the
degree of aging of the pump tube is different, the first use needs to be calibrated, suspected titration is not accurate when it is timely calibration.