User's Manual

Kamoer fluid tech(Shanghai)Co., Ltd. UIP WIFI User Manual
29
1. Ration mode: Click the title bar work mode to switch the working mode. There are two
working modes, namely continuous mode and ration mode;
2. Operation mode and progress: The ration mode operation mode is divided into automatic and
semi-automatic. The full-automatic mode is to set a cycle number, the pump will work for a
certain amount, then pause, work again until the cycle number is completed; semi-auto mode is set
One quantity, the trigger starts to run once, the pump stops after running, and the trigger starts
again and then runs again;
3. Edit: Click to enter the ration mode parameter setting interface;
4. Working volume: the volume of the single mode of the ration mode, set in the editor;
5. Pause duration: The allocation mode pause duration, when the pump works in the fully
automatic mode, the interval between each working of the pump is set in the editing;
6. Flow rate: The flow rate of the ration mode operation, set in the edit;
7. Speed: the speed corresponding to the ration mode flow rate;
8. Tube type: the type of tube running in the ration mode;
9. Direction of rotation: Click to set the direction of rotation of the pump;
10. Temperature: Click to view the temperature update;
11. Level: Click to update the liquid level status;