User's Manual

3 Product installation
This chapter mainly introduces how to install the KXP 100 and the precautions during the installation process.
Tips
This product belongs to the filling equipment. When the difference between the liquid inlet and the liquid outlet is too large, siphoning or backflow
may occur.
In order to avoid the phenomenon of siphoning and backflow, the equipment should be placed in a reasonable position to ensure that the height
difference between the inlet and outlet is within 0.5 meters.
The connecting pipe for the liquid inlet should be as short as possible, and the connecting pipe for the liquid outlet should be suspended above the
container.
Please carefully check whether the connection direction of the liquid inlet and the liquid outlet is correct.
4 App Use
This chapter mainly introduces how to control KXP 100 Filling pump with stepper motor with App
4.1 Connect The Device To The Cloud
After the device is unpacked and powered on, you need to use the App to connect the device to the cloud through a wireless router. The specific steps
are as follows:
1-2. Open the App, click the "+" button in the upper right corner of the device to add a device, enter the add device interface, select "KXP 100" in
the list of supported devices and click to enter;