Arctic 40cm Pedestal Fan KFA413 Instruction Booklet
Contents Kambrook Recommends Safety First p3 Your Kambrook Arctic Pedestal Fan p5 Using Your Kambrook Arctic Pedestal Fan p6 Care and Maintenance p7 Warranty p8 Important Please retain your instruction book for future use. In the event that you need some assistance with your Kambrook appliance, please contact our Customer Service Department on 1300 139 798 (Australia) or 09 271 3980 (New Zealand). Alternatively, visit us on our website at www.kambrook.com.
Kambrook Recommends Safety First IMPORTANT: Please retain your instruction book for future use. At Kambrook, we believe that safe performance is the first priority in any consumer product, so that you, our valued customer can confidently use and trust our products. We ask that any electrical appliance that you use be operated in a sensible fashion with due care and attention placed on the following important operating instructions.
Important Safeguards For All Electrical Appliances • Fully unwind the power cord before use. • Do not let the power cord hang over the edge of a bench or table, touch hot surfaces or become knotted. • To protect against electric shock do not immerse the power cord, power plug or housing in water or any other liquid.
Your Kambrook Arctic Pedestal Fan 1. 2. 3. 4. 5. 6. 7. 8. Fan blade size: 40cm Choice of 3 speed settings 80° oscillation to disperse the air throughout the room Easy twist controller switch Height adjustable for comfort control Tilt adjustable head to control the direction of the air Metal grille and plastic blades Convenient carry handle for easy portability Parts List 9. 10. 11. 12. 13. 14. 15. 16.
Using Your Kambrook Arctic Pedestal Fan Before First Use Fan Head Assembly Remove any promotional material from the fan. 1. IMPORTANT: When unpacking the fan, check to see you have received all the items listed in the Parts List, before discarding the packaging. 2. Assembling Your Arctic Pedestal Fan Base and Pedestal Tube Assembly 1. Remove the four screws from the criss-cross bars, and align these four holes with those on the flange. Secure the flange to the criss-cross bars with the four screws.
Setting the Oscillation The oscillation function works in all air flow settings. Press down the Oscillation switch to activate. The fan will begin to oscillate from side to side. Lift the Oscillation switch to stop the fan from oscillating. Fig. 2 To Operate the Arctic Pedestal Fan Plug the cord into a 230V or 240V power point and switch on. NOTE: To avoid an electrical circuit overload, it is recommended that no other appliances are plugged into the same circuit as your fan when it is in use.
Kambrook 12 Month Replacement Warranty In Australia, this Kambrook Replacement Warranty does not affect the mandatory statutory rights implied under the Trade Practices Act 1974 and other similar State and Territory legislation relating to the appliance. It applies in addition to the conditions and warranties implied by that legislation.
