Download

4
Kambrook Recommends Safety First
IMPORTANT: Please retain your
instruction book for future use.
At Kambrook, we believe that safe performance is the first priority in any
consumer product, so that you, our valued customer can confidently
use and trust our products. We ask that any electrical appliance that
you use be operated in a sensible fashion with due care and attention
placed on the following important operating instructions.
Important Safeguards For Your Kambrook
Arctic HV Floor Fan
• Carefully read all instructions before
operating the Kambrook Floor Fan for the
first time and save for future reference.
• Remove and safely discard any
packaging material and promotional
labels before using the fan for the first
time.
• To eliminate a choking hazard for young
children, remove and safely discard the
protective cover fitted
to the power plug of this fan.
• Ensure that the surface is level, clean
and free of water and other substances
• Always ensure the fan is properly
assembled before use. Follow the
instructions provided in this book.
• Keep the fan clean. Follow the cleaning
instructions provided in this book.
• Do not leave the fan unattended
when in use.
• Do not place anything, on top of the fan
when assembled, when in use
and when stored.
• This fan is not intended for commercial
or industrial use.
• Avoid touching mobile parts of the fan.
• Never insert fingers, pencils or any other
objects through the guards whenever
the power plug is connected, in
particular while the fan is switched on.
• Do not operate in the presence of
explosives and/or flammable fumes
or liquids.
• Never carry the fan by the cord or yank
to disconnect from an outlet; instead
grasp the cord at the plug and pull to
disconnect. Do not pull the cord around
sharp edges or corners.
• The fan must not be used if the grilles
are not fastened correctly and the
triangular base correctly fitted as per the
instructions provided in this book.
• When unpacking the fan, check to see
you have received all the parts before
discarding the packaging.
• To avoid electrical circuit overload, it is
recommended that no other appliances
are plugged into the same circuit as
your fan, when it is in use.
• Disconnect the power plug before
dismantling, assembling or before
cleaning and when the fan is not
in use.