User Manual

ManualsBrandsKAM ManualsConsole for DJDIGI ONE USB DJ controller with audio + Virtual DJ - AUDIO VIDEO CONTROLLER FOR DJ

Digi One

Audio and video software MIDI controller

Mix & scratch music and video files with transitions and effects

Comes supplied with FREE Virtual DJ LE™ software for PC/Mac

Built-in audio with stereo RCA audio master output

1/4 inch jack microphone input & mic volume control

3 x programmable Hot Cues per channel

Dual scratch effect jog wheels

3 band EQ (hi, mid & low) plus gain

Compatible with Virtual DJ Pro™ for Mac & PC (sold separately)

Sample and clone functions

Seamless loop / loop trim

Pitch control & master tempo

Easy search music library

BPM sync

Channel cue monitor

USB bus powered

Dimensions: 315 x 210 x 50mm

MANUAL VERSION 1 .0

30- 10- 10

For the latest instruction manual updates and information on the entire Kam range visit:

www.kam.co.uk

Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ

Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com

If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal.

Due to continuous product development, specifications and appearance are subject to change.

Summary of content (4 pages)

PAGE 1
Digi One Audio and video software MIDI controller M A N U A L V E R S I 3 0 - 1 0 - 1 0 O N 1 .
PAGE 2
Connection Connect the Digi One to your PC via the USB lead. Then connect the unit to powered speakers or a mixer/amplifier/speakers setup via the RCA output at the rear. Connect headphones and a microphone to the front of the Digi One. For information on drivers/software installation on your Windows PC please refer to the Software Installation manual that came with your Digi One or visit www.kam.co.uk to download the latest instructions. Apple Mac users shouldn’t need to adjust any settings.
PAGE 3
Description of functions Audio control 1. Master - control the audio output level of PC. 2. Headphones - control the volume of your headphones. 3. Track - press the load A or load B button to select which deck to load the selected track to. a. Select the track you would like to play. b. Press the track select button to confirm the selection of a folder or a track. 4. Gain and EQ. a. Gain - adjust the input signal level. b. Hi - adjust the input treble response. c. Mid - adjust the input mid range response.
PAGE 4
21. 22. 23. 24. 25. 26. Mic Volume Control – adjust the volume of a connected microphone Mic Input (front left of unit) – use it to connect a microphone to the unit Headphone Output (front right of unit) – used to connect headphones Master Output (rear of unit) – controls the output of the two RCA sockets also located on the rear of the unit USB Connector (rear of unit) – use it to connect with a laptop or PC/Mac via a USB cable. Touch Sensitive Curve – use to adjust the sensitivity.