Use and Care Manual
Copies of the I/B. Please reproduce them without any changes
except under special instruction from Team International USA.
The pages must be reproduced and folded in order to obtain
a booklet A5 (+/- 148.5 mm width x 210 mm height). When
folding, make sure you keep the good numbering when you
turn the pages of the I/B. Don’t change the page numbering.
Keep the language integrity. Print only what is inside the frame.
10 WFVC 43331 - 120501
Assembly page 10/40
Fax +1 305 430 9692
Notes:
Do not wash the filter in the dishwasher or in the washing
machine. Do not use a hair dryer to dry the filter.
Always make sure the filter is in place before operating the
appliance. Never use without the filter.
The filter should be cleaned twice a year. If visibly dirty, clean it at
once. Replace the filter if damaged.
To replace the filters, please follow instructions provided in the
separate installation guide.
STORAGE: Wrap the power cord around the main body. Insert the
hook of the adjustable tube into the side of the main body. Then,
insert the dust brush and crevice tool into the base (Fig. 19).
TROUBLESHOOTING
ISSUE
POSSIBLE REASON
POSSIBLE SOLUTION
The vacuum
cleaner won’t
run.
1. Switch button is not on.
2. Power cord is not firmly
plugged into the outlet.
3. Thermal protector is
activated.
4. There is too much water
in the barrel.
1. Turn the switch button
On.
2. Check that the plug is
inserted firmly into the
electrical outlet.
3. Allow cleaner to cool.
4. Remove some of the
water.
Suction is
reduced
1. The hose or tube is
clogged.
2. Filter is clogged.
3. Floor brush is clogged.
1. Clean tube and/or
hose.
2. Clean the filter.
3. Check floor brush and
clean if necessary.
CAUTION
Do not pick up anything that is burning or smoking, such as
cigarettes, matches, or hot ashes.
Do not use to pick up flammable or combustible liquids such as
gasoline or use in areas where they may be present.