Operation Manual


Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
13 TKG IKP 810 - 101111
Assembly page 13/28
Fax [phone]
ERROR CODE TABLE
Error code
Cause
Suggested solution
E0
No pot/pan;
Unsuitable cookware
Use suitable cookware
E1
Electrical malfunction/ Short
circuit
Contact the manufacturer or a competent
after-sales service
E2
Temperature sensor damaged
Contact the manufacturer or a competent
after-sales service
E3
Voltage too high
Have your power supply checked; Unplug
the appliance, wait about 2 min. and plug in
the appliance again
E4
Voltage too low
Have your power supply checked; Unplug
the appliance, wait about 2 min. and plug in
the appliance again
E5
Temperature on the ceramic
plate too high;
pot/pan empty;
pot/pan has too high
temperature
Wait a few minutes and let the plate or pot/
pan cool down
E6
Cooling or exhaust fan
damaged
Contact the manufacturer or a competent
after-sales service;
Clean the louvers on the housing and restart
the appliance
CLEANING
 Before cleaning, unplug and wait for the appliance to cool down.
 Wipe the housing only with a moistened cloth or sponge.
 Do not clean with any abrasive scouring pad or steel wool, as this will damage the finish.
 The ceramic plate can also be cleaned with a damp cloth or sponge. Use a commercially
available special cleansing agent for ceramic glass hobs and induction cooking plates to
remove stubborn stains or discolorations on the plate, and if necessary also a stainless steel
wool sponge.
 Do not immerse in water or any other liquid.
OVERHEATING PROTECTION
The induction cooking plate is equipped with an overheating protection.
If your cooking plate overheats (empty pot or pan), a prolonged bleep will sound. After a few
minutes the cooking function will switch off automatically.
If you take the pot or pan from the plate during use, a bleep will sound as well and the lamps
will flash as a warning. Always switch off the appliance first before taking away the pot or pan.