Operation Manual


Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
8 TKG IKP 800 - 100511
Assembly page 8/20
Fax [phone]
 Your appliance must never be switched on through an external timer or any kind of
separate remote control system.
(*)
Competent qualified electrician: after-sales department of the producer or importer or any
person who is qualified, approved and competent to perform this kind of repairs in order to
avoid all danger. In case of need you should return the appliance to this electrician.
The induction cooking plate will function only when a cooking utensil that is suitable for
induction is standing on the plate! When no pot or pan has been put on the plate, the
appliance will switch off immediately for safety reasons. Always test your pots and pans with a
magnet beforehand – if the magnet sticks to the pot or pan, it is suitable.
GENERAL USE
 Put usable cooking utensils in the middle of the plate and plug in the appliance.
 As soon as the appliance is plugged in, the LED light indicator is on.
 Turn the dial – up to the desired stage (1-5).
Step
Setting
Remark
Make the
appliance
ready for
use
- Put a pot or pan on the cooking plate
- Plug in the appliance
- Put the silver dial on the desired position (1-5). Your
cooking plate can be adjusted from minimum
to maximum.
Stage 1
- one LED
is on
400 watt
Stage 2
- two LED’s
are on
900 watt
Stage 3
-one LED
is on
1200 watt