Operation Manual


Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
12 TKG IKP 2 - 090615
Assembly page 12/48
Fax [phone]
B. Safety feature and environment-friendly operation
The cooking plate switches off automatically if it detects an abnormal temperature rise of the
pan or electric fluctuations.
The heating surface of the plate is made of heat-resistant ceramic. Therefore, the plate has a
very good isolation: if food splashes or overflows, this will not damage the plate.
Contrary to gas cooking or other cooking methods, induction cooking, which does not
produce flames or smoke, considerably reduces the dangers and risks of accidents that are
commonly associated with other cooking methods. This way, the induction cooking plate may
be considered environment-friendly.
MAINTENANCE
 Unplug the appliance and let it cool down before cleaning.
 Wipe the appliance with paper towel or a dry cloth.
 Never clean the appliance with abrasive products, as these would damage the housing.
Never clean the plastic parts with products containing benzene. Clean them with a dry
cloth.
 Never clean the appliance with water. Never immerse it in water or any other liquid.
 Make sure not to scratch the surface of the ceramic plate with cooking utensils.
 Clean the plate completely before storing it at a dry place.
 Clean the ventilation openings with a soft brush or a vacuum cleaner at low suction
power. Never put any objects through these openings.
Problems and solutions
ERROR CODE
CAUSE
SOLUTION
-
Waiting status
Place a suitable pot/pan onto the induction
cooking field and select a programme
E0
Cooking field does not work
Return the device for repair
E1
Wrong or too small receptacle
Use a correct pot or pan
E2
Overheat protection
Turn the device off and let it cool down
E3, E4
Voltage too low or too high
Connect the device to a suitable power
outlet
E5
Open circuit
Return the device for repair
E6
Ceramic plate is overheated
Turn the device off and let it cool down
PROTECTION OF THE ENVIRONMENT – DIRECTIVE 2002/96/EC
In order to preserve our environment and protect human health, the waste electrical and
electronic equipment should be disposed of in accordance with specific rules with the
implication of both suppliers and users. For this reason, as indicated by the symbol on the
rating label or on the packaging, your appliance should not be disposed of as unsorted
municipal waste. The user has the right to bring it to a municipal collection point performing
waste recovery by means of reuse, recycling or use for other applications in accordance with
the directive.