Replacement Part List

5
www.KALORIK.com
PPG 43639 - 170120
PARTS DESCRIPTION
See page 2-3.
BEFORE USE
 Each mill runs on 4 x AA batteries.
 Place the On/Off switch on the Off position.
 To open the unit and access the battery compartment, turn the mill
upside down and turn the plastic cap counterclockwise to unlock it.
Once unlocked, simply lift the battery compartment out from the
unit.
 Insert the batteries in such a way that the polarity of each battery is
respected, and matches with the symbol indicated on the battery
cradle.
 Check that the switch is on the Off position.
 To close the battery housing, put the battery cradle back into the
appliance, and replace the cap turning it clockwise until it gets
locked firmly.
To fill with pepper or salt:
 With the pepper mill standing on its base, hold the black plastic part
located around the edges of the grinding head. Hold the part firmly
and turn it counterclockwise to uncover the salt/pepper chamber’s
opening.
 Fill the transparent refill chamber with salt or pepper.
 Close the grinding head by returning it back into its initial position,
lock in place by turning the black plastic part counter-clockwise,
until the opening is completely closed.
CLOSED
OPEN