Warranty

www.KALORIK.com

EPCK 44847 - 180330

PARTS FUNCTION

Steam release knob:

Should be set to the ‘Pressure’ position before

using the unit, for the cooker to build pressure.

Set to the ‘Release’ position to release the

pressure manually or to cook without pressure.

Removable cooking

pot:

4L/4.2qt capacity non-stick coated

removable pot, provides even heat

distribution.

Silicon gasket:

Creates the air-tight seal needed for the

pressure cooker.

Gasket holding ring:

Holds up the silicon gasket.

Dew collector

Collects any condensation on the lid or the

sides of the pressure cooker

Control panel functions:

There are 8 presets in addition to a Delay time and a DIY setting. More

details about each preset are presented in the Settings table.

BEFORE THE FIRST USE

• Remove all packing materials and literature.

• To remove the lid, hold the handle, turn in a clockwise direction,

and lift off.

• Wash all removable parts and accessories in warm, soapy water.

Rinse and dry all parts thoroughly.

• Wipe the outer housing with a clean damp cloth.

• Make sure the silicon gasket is properly fitted on the gasket holding

ring.

• Place the gasket holding ring into the underside of the lid. It will only

fit in one way.