Installation Sheet

1. Prepare the Site
Provide a 2-7/8″ (73 mm) to 3-1/8″ (79 mm) diameter hole in the
wall material for the plaster guard.
Route a 3/4″ mixed water supply line to the transfer valve
location.
Apply sealant tape to the inlet port threads.
Connect the water supply to the transfer valve inlet.
2-way: If two accessories will be attached to the valve, go to the
″Installation for 2-Way″ section.
3-way: If three accessories will be attached to the valve, go to the
″Installation for 3-Way″ section.
Plaster Guard
Max
Finished
Wall
Min
Finished
Wall
2-9/16"
(65 mm)
3-3/4" (95 mm)
Mixed Water
Supply 3/4" Copper
Tubing or Piping
Inlet
1091987-2-E 4 Kallista