Installation & Assembly

Ø 1/2"

(13 mm)

All Installations: Install the gaskets

with the collars toward the holes.

(152 mm)

18" (457 mm)

Roughing-In: Handle/towel bar

combination

(152 mm)

18" (457 mm)

Handle Towel Bar

Roughing-In: Single or Back-to-Back

Important Information

The handle or towel bar can be installed

individually, back-to-back, or in

combination.

An escutcheon kit is required to cover

exposed hardware for single or mixed

configurations.

Warning:

Risk of personal injury. Do not cut or

drill tempered glass. Tempered glass

will shatter if cut or drilled.

Record your model number below

for future reference:

Combination: Assemble for single

and back-to-back configurations.

Thread escutcheons over exposed

hardware.

Back-to-back: Attach the handles/towel

bars with the setscrews.

Back-to-back: Assemble the screws

and posts.

Single: Attach the handle/towel bar with

the setscrews. Thread on the

escutcheons.

Single: Assemble the spacers,

posts, and screws. Insert the screws

opposite the handle side.

1284154-2-A

PAGE 1
Record your model number below for future reference: Warning: Risk of personal injury. Do not cut or drill tempered glass. Tempered glass will shatter if cut or drilled. Roughing-In: Single or Back-to-Back Important Information The handle or towel bar can be installed individually, back-to-back, or in combination. An escutcheon kit is required to cover exposed hardware for single or mixed configurations.
PAGE 2
Questions? Problems? For additional assistance, please contact KALLISTA's Customer Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.