Accessories INSTALLATION INSTRUCTIONS P34700 P34701 P34702 P34706 P34708 1226369-2-A 1 of 6 KALLISTA ©2013 Questions? Problems? For additional assistance, please contact KALLISTA’s Customer Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
Accessories INSTALLATION INSTRUCTIONS Thank You For Choosing Kallista We appreciate your commitment to Kallista quality products. Please take a moment to review this manual before you install your Kallista product. If you encounter any installation or performance problems, please do not hesitate to contact us at the phone number listed at the bottom of the page. Before You Begin Observe all local building codes. Prior to installation, unpack the new product and inspect it for damage.
Accessories INSTALLATION INSTRUCTIONS Roughing-in information P34702 = 14-5/16" (364 mm) P34701 = 20-5/16" (516 mm) P34700 = 26-5/16" (668 mm) P34702 = 12" (305 mm) P34701 = 18" (457 mm) P34700 = 24" (610 mm) 1-3/4" (44 mm) 2-11/16" (68 mm) P34706 P34708 2-5/16" (59 mm) 1-3/4" (44 mm) 1-3/4" (44 mm) 3-1/4" (83 mm) 5-7/16" (138 mm) 6-5/8" (168 mm) 1-3/4" (44 mm) 1226369-2-A 3 of 6 Questions? Problems? For additional assistance, please contact KALLISTA’s Customer Service Department at 1-888-4-KAL
Accessories INSTALLATION INSTRUCTIONS 1. Install the towel bar Drywall Anchors Inside Hole P34702 = 13-3/16" (335 mm) P34701 = 19-3/16" (487 mm) P34700 = 25-3/16" (640 mm) Outside Hole Nail Tile Anchors Inside Hole Outside Hole Mounting Plate Towel Bar Escutcheon Setscrew Measure and mark the outside hole locations for the mounting plates (to the outside edge of the towel bar escutcheon) based on the dimensions shown.
Accessories INSTALLATION INSTRUCTIONS 2. Install the hook Drywall Anchors Nail Tile Anchors Mounting Plate Setscrew Determine the location of the mounting plate. Mark the location of the mounting plate holes on the finished wall, making sure that the mounting plates will be level when mounted. NOTE: Anchors have been supplied for both drywall and tile applications. If anchors are needed, select the correct anchors for the type of wall material.
Accessories INSTALLATION INSTRUCTIONS 3. Install the tissue holder Drywall Anchors Nail Mounting Plate Tile Anchors Setscrew Determine the location of the mounting plate for the fixed tissue holder arm assembly. Mark the location of the mounting plate holes on the finished wall, making sure that the mounting plates will be level when mounted. NOTE: Anchors have been supplied for both drywall and tile applications. If anchors are needed, select the correct anchors for the type of wall material.
