Installation & Assembly

INSTALLATION INSTRUCTIONS
Deck-Mount
Bridge Kitchen Faucet
1102265_2_B
3 of 4
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX [phone].
INSTALL The FAUCeT
Sink/Countertop
Escutcheon
O-Ring
Cold Supply
Hot Supply
Stud
Bracket
Nut
Washer
Optional Sidespray
Hose Outlet
IMPORTANT! If you are mounting the faucet to an uneven surface (such as tile grout lines), apply a
suitable sealant in addition to the O-rings and gasket provided. Do not use petroleum based sealant.
Slide an escutcheon and O-ring over each of the hoses and onto the faucet. 
Insert the faucet through the mounting surface with the cold supply hose to the right side of the user. 
Assemble a bracket, washer, and nut to each stud from underneath the mounting surface. 
Securely tighten the nuts with an adjustable wrench. 
Ensure the handles are in the OFF position, as shown. 