Installation & Assembly

INSTALLATION INSTRUCTIONS
Wall Mount Showerhead with Arm
1096748_2_D
3 of 3
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX [phone].
1. INSTALL THE SHOWERHEAD
CAUTION: Risk of product damage. To avoid
plugging the showerhead spray outlets, use thread
sealant tape on the shower arm threads. Do not use
thread sealant compound (pipe dope).
 Remove the temporary nipple from the shower elbow.
 Slide the escutcheon onto the shower arm.
 Apply thread sealant tape to the threads and install
the shower arm to the shower elbow.
 Carefully tighten the shower arm with a clean strap
wrench.
 If desired, apply a bead of clear sealant around the
perimeter of the escutcheon.
 With the showerhead off, ush out the system.
 Ensure that the screen is positioned as shown on the
showerhead.
 Apply thread sealant tape to the shower arm and
thread the showerhead to the shower arm.
 Use a clean strap wrench to tighten the showerhead.
 Check for proper operation.
Shower
Elbow
Escutcheon
Shower Arm
Screen
Showerhead
Apply Thread
Sealant Tape.