Installation & Assembly

INSTALLATION INSTRUCTIONS
Wall Mount Showerhead with Arm
1096748_2_D
2 of 3
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX [phone].
THANK YOU FOR CHOOSING KALLISTA
We appreciate your commitment to Kallista quality products. Please take a moment to review this manual
before you install your Kallista product. If you encounter any installation or performance problems, please do
not hesitate to contact us at the phone number listed at the bottom of the page.
BEFORE YOU BEGIN
 Choose an automatic compensating valve with the appropriate minimum ow rating, to assure your valve
will provide safety at the lowest ow rates. For a showerhead or handshower that has a maximum ow rate
of 2.0 (7.6) gpm (L/min) and a minimum ow rate of 1.6 (6.1) gpm (L/min) use with automatic compensating
valves rated at 1.6 (6.1) gpm (L/min) (or less).
 Observe all local plumbing and building codes.
 Shut off the main water supply.
 The nished wall or bath/shower unit must be installed prior to installing this trim.
 The appearance of your product may differ from what is shown in these instructions, however, the
installation procedure is the same.
 Kallista reserves the right to make revisions in the design of products without notice, as specied in the
Price Book.
TOOLS AND MATERIALS
Strap WrenchSealant Tape
Rags