Installation Sheet

INSTALLATION INSTRUCTIONS
Lavatory Faucet
1223783-2-D
5 of 7
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
3. CONNECT THE HOSES
Valve
Hose
Valve
Hose
 Thread the male ends of the hoses into the valves. Do not overtighten!
 Thread the female ends of the hoses onto the tee.
4. INSTALL THE DRAIN
Drain Body
Nut
Washer
Gasket
Flange
Apply plumbers putty.
Stopper
Tailpiece
Apply thread sealant.
 Disassemble the stopper and fl ange from the drain body.
 Apply a small bead of putty or sealant to the bottom of the fl ange. Insert the fl ange into the drain opening.
 Assemble the nut, fl at washer, and tapered gasket (tapered side up) fully onto the drain body.
 From the underside of the lavatory, insert the drain body up into the drain hole.
 From the top of the lavatory, handtighten the fl ange onto the drain body until secure.
 Install the stopper and tighten fi rmly.
 Turn the drain body so the word KALLISTA on the stopper is straight.
 Tighten the drain body nut fi rmly while holding the drain body to maintain the stopper position.
 Using a damp cloth, remove any excess putty or sealant.
 Apply thread sealant tape to the tailpiece threads and thread the tailpiece onto the drain body.