Installation Sheet

INSTALLATION INSTRUCTIONS
Lavatory Faucet
1223783-2-D
3 of 7
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
1. INSTALL THE SPOUT
Seal Gasket
Spout Shank
Tee Assembly
Nut
Nylon Gasket
Rubber Washer
Washer
O-Ring
Gasket Trim O-Ring Trim
Install the Spout
 Remove the tee assembly, nut, and washer from the spout shank.
 Ensure that the seal gasket or O-ring is installed to the underside of the spout.
 Fit the spout shank through the top of the lavatory.
 Install the washer and nut onto the spout shank. Tighten the nut with a wrench to secure.
 Insert the rubber washer and nylon gasket into the tee. Thread the tee onto the spout shank.
 Hold the spout in position and tighten the tee securely. Do not overtighten!
 If desired, apply a bead of silicone sealant or caulk around the base of the spout.