Operation Manual

Original User Guide | Pedelec Impulse Evo RS Version 1 EN-11
1. Grip the battery with both hands
and hold it to the left of the docking
station.Ensure that the battery
charge level display is pointing
towards you.
2. Place the battery catches into the
dents provided.
3. Roll the battery into the docking
station until it clicks into place.
4. Turn the battery key clockwise.
Now the battery is locked.
2. Quick-start guide
2.1 Charging the battery
You need not charge the battery if just taking a short test
ride. You should charge it before your first longer cycle ride
however,  6.3.1 Charging a battery Page EN-56, because the
battery is only partially charged (transportation regulations
dictate that batteries are supplied partially charged - by
approx. 50%).
Perform a learn cycle. You should drain a new, fully charged
battery once until the assist function stops, and without
recharging it in-between. By doing so, the battery "learns"
its capacity, and the actual capacity matches the charge
level display. Please perform a learn cycle every six months
or 5,000 kilometres. If you do not repeat the cycle from
time to time, the difference between actual battery capacity
and charge level display will become greater and greater.
2.2 Inserting and locking into place a battery
PLEASE NOTE
Hold the battery tight so it does not fall. It might be damaged
otherwise.