Operation Manual

EN-56 Original User Guide | Pedelec Impulse Evo RS Version 1
6.3.1 Charging a battery
A battery can stay tted to the Pedelec for the charging
process. It can also be removed and charged elsewhere.
Charger 1:
1. Plug the mains connector into a socket
2. Remove the protective cap on the battery
3. Connect the charger cable to the battery (it clicks into place)
4. When the charge process has nished, unplug the charger cable from
the power jack of the battery
5. Unplug the connector from the socket
Charger 2
Charger connected to
power supply
| the green LED ashes
Battery being charged
| the green LED ashes
Fully charged
| the green LED continually ON
Charging fault
| the red LED ashes
Charging display
Charger cable