Operation Manual

20 Original User Manual | Pedelec Impulse 2.0
7.4.4 Dev
ice settings
Under the menu sub-item “Device settings”, you can select
the following items by pressing the / button:
• Display Chapter 7.4.4.1
• Drive Chapter 7.4.4.2
• Miscellaneous Chapter 7.4.4.3
• Back
Conrm your selection by tapping the button.
7.4.4.1 Display
Choose om the following using the
/ button:
• Contrast
• Brightness
• Language
• Unit
• Back
Conrm your selection by tapping the button.
Contrast: You can select the following values using the
/ button:
Very low contrast -35%
-30%
-25%
-20%
-15%
-10%
-5%
Average “Standard”
5%
10%
15%
Very high contrast 20%
The change in contrast is implemented immediately. Tap-
ping the
button conrms your selection and then takes
you back to the menu sub-item display.
pressing the
button. The respective contents are then
displayed for you. In order to return to the main menu
display om the menu sub-items, you must select the
menu sub-item “Back” and conrm by pressing the but-
ton. You can also return to the main menu by pressing and
holding the button for three seconds.
7.4.1 Drive data
The following data are displayed in the menu sub-item
“Drive data”:
• Trip (in km)
• Trip time (in 00:00:00)
• Trip max (in km/h)
• Trip Ø (in km/h)
• Trip cost (in €)
• Tour (in km)
• Tour Ø (in km/h)
• Tour cost (in €)
• Overall (in km)
• Overall savings (in €)
• Tot. sav. CO
2
(in kg)
• Back
Selected the desired item using the
/ buttons. The
selected item is highlighted in bold. Conrm your selec-
tion by tapping the button. You are taken back to the
menu sub-items.
7.4.2 Delete trip data
Under the menu sub-item “Delete trip data”, you can
delete the kilometres indicated for the current day trip.
The following question appears on the display: “Conrm
delete?”, and below it “Yes” or “No”. Select the desired
item using the
/ button. The selection is highlighted
in bold. Conrm your selection by tapping the button.
You are taken back to the menu sub-items.
7.4.3 Delete overall data
Under the menu sub-item “Delete overall data”, you can
delete the total kilometres covered. The following ques-
tion appears on the display: “Conrm delete?”, and below
it “Yes” or “No”. Select the desired item using the /
button. The selection is highlighted in bold. Conrm your
selection by tapping the button. You are taken back to
the menu sub-items.