Operation Manual

14 Original User Manual | Pedelec Impulse 2.0
5.2 Battery information system
There is a display panel on the outer face of the battery
which includes ve LEDs and a batter
y key or push button.
The LEDs light up as soon as you press the battery key
or push button. Information about the charge state and
capacity of the battery is provided based on the number of
LEDs that light up and the way in which they light up.
Battery key Push button
DOWN TUBE BATTERY SEAT TUBE BATTERY
5.2.1 Checking the charge state
a) Down tube battery: Press the battery key briey, the
LEDs light up and display the current battery charge state.
DISPLAY BATTERY CHARGE STATE
•••••
5 LEDs light up 100–%
••••
4 LEDs light up –%
•••
3 LEDs light up –%
••
2 LEDs light up –%
•
1 LED lights up –%
1 LED ashes –%
b) Seat tube battery: Press the push button briey, the
LEDs light up and display the current battery charge state.
SEAT TUBE BATTERY DISPLAY BATTERY CHARGE STATE
•••••
5 LEDs light up 100–%
••••
4 LEDs light up –%
•••
3 LEDs light up –%
••
2 LEDs light up –%
•
1 LED lights up –%
1 LED ashes –%
5 LEDs ash quickly % or overloaded *
1st LED ashes
quickly
Charging fault **
* All 5 LEDs ash quickly: The battery is a) empty and is
being switched o, or is b) overloaded.
a) If the battery is overloaded, it will switch back on aer
a short idle period and can then be used normally.
b) If the battery is empty, it will work once again briey
following a short period of rejuvenation and will then
switch back o. It must now be charged.
** The 1st LED ashes quickly: A charging fault is present.
Please take the battery to your specialist cycle shop.
5.2.2 Checking the capacity
a) Down tube battery: If you hold down the battery key for
roughly ve seconds, the LEDs show the current battery
capacity.
SEAT TUBE BATTERY DISPLAY CAPACITY
••••
4 LEDs light up approx. –%
•••
3 LEDs light up approx. –%
••
2 LEDs light up approx. –%
•
1 LED lights up approx. –%
1 LED ashes approx. –%
b) Seat tube battery: If you press the push button for ve
seconds, the LEDs show the current capacity of the battery.
SEAT TUBE BATTERY DISPLAY CAPACITY
•••••
5 LEDs light up –%
••••
4 LEDs light up –%
•••
3 LEDs light up –%
••
2 LEDs light up –%
•
1 LED lights up –%
1 LED ashes  %