Operation Manual

Original User Manual | Pedelec Impulse 2.0 Ergo 23
Contrast: You can select the following values using the
/ button:
Very low contrast -35%
-30%
-25%
-20%
-15%
-10%
-5%
Average Standard
5%
10%
15%
Very high contrast 20%
The change in contrast is implemented immediately. Tap-
ping the
button conrms your selection and then takes
you back to the menu sub-item display.
Brightness: You can select the following values using the
/ button:
Very bright -50%
45%
40%
35%
30%
Average Standard
5%
10%
15%
Very dull 20%
The change in brightness is implemented immediately.
Pressing the
button conrms your selection and then
takes you back to the menu sub-item display.
Language: You can choose to have the information shown
on the display in the following languages:
Deutsch
English
Francais
Nederlands
Espanol
Italiano
Suomi
Dansk
Select the desired item using the
/ buttons. The se-
lected item is highlighted in bold. Conrm your selection
by tapping the button. This takes you back to the menu
sub-items.
7.3.2 Delete trip data
Under the menu sub-item “Delete trip data”, you can
delete the kilometres indicated for the current day trip.
The following question appears on the display: “Conrm
delete?”, and below it “Yes” or “No. Select one of these
using the
/ button. Your selection is highlighted in
bold. Conrm your selection by tapping the button. This
takes you back to the menu sub-items.
7.3.3 Delete overall data
Under the menu sub-item “Delete overall data”, you can
delete the total kilometres covered. The following ques-
tion appears on the display: “Conrm delete?”, and below
it “Yes” or “No”. Select one of these using the
/ but-
ton. Your selection is highlighted in bold. Conrm your
selection by tapping the button. This takes you back to
the menu sub-items.
7.3.4 Device settings
Under the menu sub-item “Device settings”, you can select
the following items by pressing the
/ button:
Display
Chapter 7.3.4.1
Drive Chapter 7.3.4.2
Miscellaneous Chapter 7.3.4.3
Back
Conrm your selection by tapping the
button.
7.3.4.1 Display
Choose om the following using the
/ button:
Contrast
Brightness
Language
Unit
Back
Conrm your selection by tapping the
button.