Installation Guide

FR 5300

Installation Instructions

Sanitary ﬁtter

Note I: The multi-purpose tool included

in the supply is to be exclusively used for

screwing on the foot units, as otherwise

the threads could be damaged.

Note II: Attach the central foot units in

the middle of the frame sides (legs), if

possible.

Note III: The sliding blocks are only to be

secured against being displaced again.

The hexagon socket screws may only

be tightened hand-tight, so that sliding

blocks (C) and multi-purpose tool are not

damaged.

MOUNTING THE SHOWER TRAY FOOT FRAME

• Put foot frame (A) on the ﬂoor with preassembled sliding blocks

• Screw-in foot units (B) hand-tight/slightly blocking into the sliding

blocks (C) (see note I).

• If required, unscrew sliding blocks (C) and move them into a suit

able position according to the local situation (see note II).

• Tighten hexagon socket screws (E) of sliding blocks (C) hand-tight

(see note III).

• Turn foot frame and install it in provided place.

III

III + V