Installation Guide

FR 5300

Installation Instructions

Sanitary ﬁtter

ALIGNING THE SHOWER TRAY FOOT FRAME

Note I: Set up the foot frame in exactly

horizontal position by means of a spirit

level to ensure a reliable water drainage.

Note II: Care should be taken that the

central foot units do not lift up the foot

units arranged at the corners and that the

foot units all stand ﬁrmly on the ground

with the sound isolating elements.

If the walls adjoining the foot frame are

not angular, the supervisor has to be in

formed and remedial action to be taken

(see DIN 18 202 Tolerances in building

construction - Table 2 Angle tolerances.

“The walls must not exceed the tolerance

by more than 6 mm over a length of 1 m“).

• Adjust the required height by means of the four foot units (A) at

the corners of the foot frame by using the multi-purpose tool (see

note I).

• Adjust the central foot units (B) such that they stand ﬁrmly on the

ground and serve as a support of the foot frame (see note II).

• After the alignment of the foot frame, secure the foot units

against displacing by means of the hexagon nuts (if available) by

making use of the multi-purpose tool.

17 mm

10 mm

20 mm