Installation Guide

_______________________________________________________________________________
14074 Trade Center Drive Suite 141 Fishers, IN 46038 (o) 317-774-3226 (F) 866-543-6717
9. Make sure that the curb and each splash wall is level for proper drainage.
10. Install the shower backer board and water proofing in accordance with the standards
established by the Tile Council of North America, Inc.
11. Seal and waterproof joint between backer board and the Tile Redi splash walls.
Mix the approved Laticrete 300 epoxy or other approved epoxy stone adhesive and trowel the
epoxy to shower pan using an 1/8 inch trowel and set tiles directly in epoxy.