Assembly Instructions

Customer Service: [phone], [phone], [e-mail]
sre wilyppe sutih
k & W
acBl
T)
SCEN
ANDE
NC
(I
KET
SOC
HT
OO
M
LINE:S
DLINE:RIBBE
RESSE WIHOU
L
N
G
J-BOX
C10-15-02-00
C10-15-02-00
C10-15-02-00
C10-15-02-00
C10-15-02-00 C10-15-02-00
G9 LED bulbs
A
B
C
Assembly & Installation Instructions for:
509752
Cross Bar with Tabs
8/32 Screws x 2
Flat Head Screw
Canopy
P2
IMPORTANT!
(Install top Clear Glass and
Bottom Clear Glass
following the labels marks (A) for
top and (B) for bottom)
Fixture Installation:
Step 9. Install Cross Bar to J-Box using the
8
32
screws, then rise
fixture up close enough to make wire connections.
While an extra set of hands holds fixture make wire connections
as follows:
Step 10. Refer to wiring diagram:
Splice the ribbed side of fixture cord and connect to the white
power supply wire, then splice the smooth side of the fixture cord
and connect to power supply black wire.
Step 11. Connect fixture bare thin or copper wire to ground/green
wire in outlet box.
Secure all wire connections with wire nuts, electrician's black tape
or as stated by your local electrical code.
Step 12. Carefully tuck all wires inside J-Box and raise canpy flat
to ceiling, align canopy side holes to cross bar holes and secure
with the flat head screws.
Step 13. Turn lights on. Clean with a damp cotton cloth.
Enjoy your light fixture for many years to come!