‘ ALCOA ASSEMBLY & INSTALLATION INSTRUCTIONS MODEL: 4647 RODEO DRIVE 6 LIGHT 30 INCH PENDANT KNOCK DOWN ASSEMBLY STEP 1: Attach the leather strap in the loop and secure with connecting screws as shown. Page 2 www .
4 ASSEMBLY & INSTALLATION INSTRUCTIONS MODEL: 4647 RODEO DRIVE 6 LIGHT 30 INCH PENDANT pees ELECTRICAL / MOUNTING ASSEMBLY STEP 2: STEP 3: STEP 4: STEP 5: STEP 6: STEP 7: Attach mounting plate to outlet box with the (2) 8/32"x 3/4" screws. Fasten Nipple into mounting plate so that that extend away from the ceiling when the mounting plate is installed. Lock in place using the hex nut and washer died. UNCTION BOX provide! ya (NOT Toluene) BLACK & SMOOCH ROUND WIRE WIRE O Determine fixture height.
ASSEMBLY & INSTALLATION INSTRUCTIONS MODEL: 4647 RODEO DRIVE 6 LIGHT 30 INCH PENDANT ELECTRICAL / MOUNTING ASSEMBLY = 1 RADS LOCK UP NUT LASS BOWL STEP 10: Slide-in the glass bow! to the main fixture as shown, lock in place using the brass nut provided. 60W BULB (NOT INCLUDED) SOCKET STEP 11: Install bulbs to the sockets as shown. Do not use bulbs that exceed 100 Watts. Page 4 ‘www.
KALE ASSEMBLY & INSTALLATION INSTRUCTIONS i MODEL: 4647 RODEO DRIVE 6 LIGHT 30 INCH PENDANT PARTS LIST IMAGE PARTS NAME ary X-9 Parts Bag 1PC Screw PCs Threaded Nipple 1PC Star Washer 1PC Hex Nut PCs Open-able Chain PCs Chain {4ft) 1PC Canopy 1PC ‘www alcoholism Page 5
