ASSEMBLY & INSTALLATION INSTRUCTIONS 4 MODEL: 404320 EMERSON 1 LIGHT SMALL WALL BRACKET ALCOA COMPONENT ASSEMBLY [alas ane STEP 1: Disassemble item by removing screws to the main fixture as shown. STEP 2: Drop the glass panel to the frame as shown. STEP 3: Install bulb, do not use bulbs that exceed 60w. STEP 4: Put back again the glass / frame assembly to the main fixture and secure using screws (use Allen wrench provided to tighten) provided as shown.
4 REALER MODEL: 404320 ASSEMBLY & INSTALLATION INSTRUCTIONS EMERSON 1 LIGHT SMALL WALL BRACKET ELECTRICAL / MOUNTING INSTALLATION STEP &: STEP 8: STEP 7: STEP 8: STEP 9: Fasten {2} 8-32 x 1 %” studs into mounting plate so that they extend away from the ceiling when the mounting plate is installed. Attach mounting plate to outlet box with the (2) 8-32 x 3/4" screws. Refer to wiring diagram.
ALCOA ASSEMBLY & INSTALLATION INSTRUCTIONS MODEL: 404320 EMERSON 1 LIGHT SMALL WALL BRACKET PARTS LIST IMAGE PARTS NAME QTY X-A Parts Bag 1PC Screw PCs Ball Nut PCs Hex Nut PCs Stud PCs Seeded Glass 1PC Allen Screw 1PC Page d ‘www alcoholism
