ASSEMBLY & INSTALLATION INSTRUCTIONS MODEL: 403420 SHERWOOD 1 LIGHT WALL POCKET ALCOA COMPONENT ASSEMBLY STEP 1: Disassemble item by removing screws to the main fixture and install bulb, do not use bulbs that exceed 60w as shown. o STEP 2: Drop the glass panel to the frame and secure with bolt & clip as shown. STEP 3: Install again the top frame, secure using the screw provided as shown. NOTE : To avoid electric shock, apply water sealant on all sides of the fixture mounted on the wall.
ASSEMBLY & INSTALLATION INSTRUCTIONS MODEL: 403420 SHERWOOD 1 LIGHT WALL POCKET ALCOA ELECTRICAL / MOUNTING INSTALLATION STEP 4: Fasten (2) 8-32 x 1 %" studs into mounting plate so that they extend away from the ceiling when the mounting plate is notated. 9 9p watt EN [titmouse) BLACK & WHITE SUPPLY 1/2" STUD (2 PCs) STEP 5: Attach mounting plate to outlet box with the (2) 8-32 x GROUND SUPPLY Wi — 3/4" screws. TINTING PLATE STEP 6: Refer to wiring diagram.
ASSEMBLY & INSTALLATION INSTRUCTIONS MODEL: 403420 SHERWOOD 1 LIGHT WALL POCKET REALER PARTS L IST PARTS NAME ary X-A Parts Bag 1PC Screw PCS a8 Ball Nut PCs Hex Nut PCS Stud PCS Side Glass Panel PCS Front Glass Panel 1PC Page 4 www alcoholism
