MODEL: 506153 LAKES ASSEMBLY & INSTALLATION INSTRUCTIONS PALOMAR 26" 12 LIGHT PENDANT KNOCKDOWN ASSEMBLY STEP: WIRES CENTER STEIN {FIXTURE LOOP} Pull the wires. Attach the fixture loop to the main fixture as shown. COMPONENTS ASSEMBLY BULB (NOT INCLUDED} & _INN__JION__ AL STEP 2: Install bulb, do not use bulbs that exceed 60 Watts.
i GALLO ASSEMBLY & INSTALLATION INSTRUCTIONS MODEL: 506153 PALOMAR 26 12 LIGHT PENDANT MOUNTING / ELECTRICAL INSTALLATION STEP 3: STEP 4: STEP §: STEP 6: STEP: STEP 8: STEP 9: Fasten nipple into mounting plate so that they extend away from the ceiling when the mounting plate is installed. Lock in place using the hex nut & washer provided. Attach mounting plate to outset box with the (2) 8-32 x %" screws. Determine fixture height. Make adjustment if needed.
PALOMAR 26" 12 LIGHT PENDANT Rancor ASSEMBLY & INSTALLATION INSTRUCTIONS MODEL: 506153 PARTS LIST IMAGE PARTS NAME ary X-9 Parts Bag 1PC Screw PCS Threaded Nipple 1PC Star Washer 1PC Hex Nut PCS Canopy 1PC 0 fl Open-able Chain PCS Chain (4ft) 1PC Page 4 ‘www.kalco.
